MACTRA
Marine Equipment - Superwind Wind Generators
Superwind Charge Regulator CR 30 W
The CR30W is a sophisticated charge regulator for 12 V or
24 V DC small wind applications based on a special micro-controller
The regulation is done by a shunt load (power resistors) which is switched
by the regulator to prevent overcharging. Therefore the wind generator
can be connected directly to the battery and never runs unloaded.
The micro controller together with a smart electronic circuit provides
high-efficiency charging technology combined with a reduction in the number
of electronic components. Therefore excellent battery treatment is now
available at reasonable cost and with outstanding reliability even at
tough environmental conditions.
The self-adjusting, temperature-compensated three-stage PWM charging method
(constant current - boost/equalization - float) provides a significant
increase of the battery lifetime.
The charge controller adjusts itself to battery type, battery capacity
and ambient temperature to improve battery treatment.
The CR 30 W can also switch off consumer loads up to 20 A automatically
for deep discharge protection.
Three-stage charging method
Automatic
12 / 24 Volt detection
Self-adapting
charge algorithm
Self-adapting
charge algorithm
Delivery includes power resistors.
Technical Data
Nominal voltage: 12/24 V
Max. shunt load current: 30 A
Max. load current: 20 A
Dimensions: 34 x 133 x 216 mm
Self power consumption: <4 mA
Charge regulator CR 30 W
Please note all prices shown on this site do not include VAT at 17.5%
Why not call for a chat - if we can help we will.
Contact us:
MACTRA MARINE
Unit 20, Worle Industrial Centre, Worle, Weston-Super-Mare, North Somerset,
England BS22 6BX
Tel: +44 (0) 1934 517288 Fax: +44 (0) 1934 520684 E-mail: info@mactrashop.co.uk
© Mactra Marine Equipment
World Cruising
Club website
(opens in new window)
Back to Top