MACTRA
Marine Equipment - Superwind Wind Generators
Superwind Charge Regulator Marine CRM
The charge regulator CRM is especially suitable for marine
applications. It is completely sealed and thus effectively protected against
the marine environment
The regulator has two separate outputs, which can be used to charge two
battery sets separately (eg. starter battery and service battery on a
yacht). The two outputs can be connected together if only a single battery
shall be charged. More than two separate battery sets are charged by wiring
additional diode units between the batteries. For adaption to different
types of batteries the charging voltage can be adjusted in a range of
+/- 20 %.
Important:
An advantage of the CRM is that it only regulates the voltage of the wind
turbine. It is not influenced by (and does not influence) other power
sources connected to the battery like alternators, gensets etc.
Delivery includes power resistors.
Technical Data
Charge regulator CRM 12 V
Nominal voltage:12 V
Charging voltage (default): 14,2 V
Charging voltage setting range: 11,5 .... 17,0 VDC
Max. current for dump loads: 40 A
Charge regulator CRM 24 V
Nominal voltage: 24 V
Charging voltage (default): 28,4 V
Charging voltage setting range: 23,0 .... 30,5 VDC
Max. current for dump loads: 20 A
Back to Top
Please note all prices shown on this site do not include VAT at 17.5%
Why not call for a chat - if we can help we will.
Contact us:
MACTRA MARINE
Unit 20, Worle Industrial Centre, Worle, Weston-Super-Mare, North Somerset,
England BS22 6BX
Tel: +44 (0) 1934 517288 Fax: +44 (0) 1934 520684 E-mail: info@mactrashop.co.uk
© Mactra Marine Equipment
World Cruising
Club website
(opens in new window)