Home Mactra Marine Equipment Home News & Events Used Marine Equipment Yacht Surveys Testimonials Pricing Contact

Aries Windvanes Katadyn Watermakers Ocean Rower & Racer Schenker Watermakers Iridium Satellite Phones SCS Pactor Superwind Wind Generators

Superwind Home Superwind Products Superwind Technology Press Articles Image Gallery
Superwind Wind Generator 350 Charge Regulator Marine CRM Charge Regulator CR30W Stop-switch Yacht Mast Set

MACTRA Marine Equipment - Superwind Wind Generators - Charge Regulator Marine CRM

Superwind Charge Regulator Marine CRM

The charge regulator CRM is especially suitable for marine applications. It is completely sealed and thus effectively protected against the marine environment

The regulator has two separate outputs, which can be used to charge two battery sets separately (eg. starter battery and service battery on a yacht). The two outputs can be connected together if only a single battery shall be charged. More than two separate battery sets are charged by wiring additional diode units between the batteries. For adaption to different types of batteries the charging voltage can be adjusted in a range of +/- 20 %.

Important:

An advantage of the CRM is that it only regulates the voltage of the wind turbine. It is not influenced by (and does not influence) other power sources connected to the battery like alternators, gensets etc.
Delivery includes power resistors.

Technical Data

Charge regulator CRM 12 V

Nominal voltage:12 V
Charging voltage (default): 14,2 V
Charging voltage setting range: 11,5 .... 17,0 VDC
Max. current for dump loads: 40 A

Charge regulator CRM 24 V

Nominal voltage: 24 V
Charging voltage (default): 28,4 V
Charging voltage setting range: 23,0 .... 30,5 VDC
Max. current for dump loads: 20 A