Home Mactra Marine Equipment Home News & Events Used Marine Equipment Yacht Surveys Testimonials Pricing Contact

Aries Windvanes Katadyn Watermakers Ocean Rower & Racer Schenker Watermakers Iridium Satellite Phones SCS Pactor Superwind Wind Generators

SCS Pactor Home SCS Pactor Products: 1 2 3 4 5 6 SCS Pactor website Winlink website Sail Mail website

MACTRA Marine Equipment - SCS Pactor Products Page 3

The SCS PTC-IIpro

PACTOR-II & PACTOR-III
Real multi port unit
Low power consumption
GPS interface for NMEA data

PACTOR-III is optional. For a permanent use you need a valid license!

The ultimate HF modem! Fast, full featured and upgradable to PACTOR-III. Send email, transfer files, establish real-time data links. The PTC-IIpro modem is the multi mode data interface between your PC and radio equipment. The PACTOR-II mode is the industry standard, and the most robust digital mode available for radio data connections. The PTC-IIpro will maintain links in conditions with signal to noise ratios of minus 18 dB, transferring data with absolutely inaudible signals.

The PTC-IIpro comes standard with 2 MB of RAM for incoming data storage, integrated RS-232 and TTL interface for control of common radios and a temperature compensated crystal oscillator for stability. The PTC-IIpro incorporates an audio amplifier for output to a speaker or headphones, which allows the PTC-IIpro's powerful DSP to be used with any audio signal. Built-in ability for GPS position reporting. With the optional Packet-Radio modules, the PTC-IIpro will function as a VHF/UHF modem (up to 19200 baud) and act as a bidirectional gateway for data between HF and VHF/UHF radios.

Easily installed with compatible radios from Icom, Kenwood, Yaesu, SGC, SEA, Furuno, R&S and others. Use the PTC-IIpro with commercial stations worldwide or the international network of Winlink amateur radio operators that support PACTOR-II and PACTOR-III.

Technical Data

Audio input impedance: 47 k

Audio input level: 10 mVp-p - 2 Vp-p

Audio output impedance: 1 k

Audio output level: max. 3 Vp-p adjustable in 1 mV steps

Audio processing: Digital Signal Processor DSP56303 / 100 MHz 768 kByte additional DSP RAM

FSK output: TTL levels, high - Mark, low - Space

Serial interface: Sub-D 9 (AT type) 2400 - 115200 Baud

Processor: Motorola MC68360, 32 Bit CMOS CPU 25 MHz

RAM: static 2 MByte, CMOS, battery buffered

Realtime clock: Date and time

Front panel: 10 char. LED dot matrix display 30 LED's split into various functional groups

Rear panel: Power switch, sockets for transceiver connection, socket for the serial interface (RS232)

Power Supply: 10 - 20 V DC, 500 mA max., reverse polarity protected, self resetting fuse

Dimensions: Width 172 x Height 43 x Depth 205 mm

Weight: 730 g

Operating temperature: -10 to +50 °C

Standard Accessories

Modem, Power Connector, RS232 cable, Audio cable, Control cable, CD-ROM, Installation Guide