MACTRA
Marine Equipment - Katadyn Watermakers
PowerSurvivor 80E
A desalinator which covers all water requirements on board
in an elegant and intelligent way. Ideal for 1 to 6 people or (sailing)
boats up to 13 metres.
Click here for
PDF Fact sheet
FACTS
Device
for greatest convenience with unbeatable advantages (see Benefits)
Compact
and highly durable product which has been put to the test by, e.g., ocean
sailors
Available
as 12V or 24V unit
Pump
and membrane are separate in the modular version. Makes installation easier
Makes
boat owners independent of water stations on the coast
Covers
entire daily water requirement (drinking, showering, cleaning etc) of
6 people.
Contrary
to popular opinion, the water requirement is much less on board than on
land
PRODUCT CHARACTERISTICS > BENEFITS
Minimum
and compact dimensions > does not waste a cm2 of space, can be put
anywhere
12.9
litres of water per hour > brings comfort on board and covers the entire
daily water requirement of 6 people
Not
an oversized large system > fewer water standstill times, lower risk
of germs reforming + higher useful life of membrane than with large systems
High
running smoothness > does not disturb the idyll of being at sea
Supply
of drinking water independent of location > saves water reserves and
costs with a better water quality
Very
user-friendly design > simple to install, operate and maintain
Does
not require additional pump and no reverse cleaning systems
Available
as a covered version > even higher running smoothness and more attractive
Tough
design > 3-year guarantee
PRODUCT CHARACTERISTICS
Technology: Reverse osmosis
Salt Rejection: 98.4% on average (96% minimum. The rate depends on different
influence factors such as pressure, throughput or
the quality of water)
Flow: Approx. 12.9 l/h +/- 15 %
Weight: 22.2 kg (enclosed version) or 15.4 kg (modular version)
Dimensions: 24.1 x 43.2 x 52.7 cm (enclosed version) or 15.7 x 34.3 x
44.5 cm (modular version)
Current: 12 Volt DC / 8 amp, 24 Volt DC / 5 amp
Guarantee: 3 years
Material: Stainless steel, plastics. Membrane approved by the FDA (Food
and Drug Administration)
Article No.:
8013443 PS 80E enclosed (12 V)
8013441 PS 80E modular (12 V)
* Earlier PUR PowerSurvivor
KATADYN'S PATENTED ENERGY RECOVERY SYSTEM
The Katadyn Energy Recovery system takes advantage of stored
energy in the high pressure reject water that is typically wasted.
The pressurized reject water is recirculated to the back side of the piston
to aid the next stroke. This energy is kept in the
system, resulting in less work to achieve fresh water.
CONDITIONS OF OPERATION
Battery with at least 60Ah/12 V. The PowerSurvivor can be
connected to existing sea valves. Appropriate adapters are
supplied.
OPTIONS FOR POWERSURVIVOR
Silt Reduction Kit
For waters with high levels of suspended matter, e.g. in shallow anchorage,
we would recommend you use an additional prefilter.
This additional filter is finer (5 microns - 1 micron = 0.001 mm) than
the standard filter (30 microns) and is placed after
it. A booster water pump (12V/0.8 A/h) is also provided. This pump compensates
for the loss through the second filter and increases
water production. We would also recommend the prefilter kit when the PowerSurvivor
is not installed under the water
line and when it is in constant use to increase the intervals between
servicing.
Katadyn reserve the right to modify products
NEXT
PAGE
Please note all prices shown on this site do not include VAT at 17.5%
Why not call for a chat - if we can help we will.
Contact us:
MACTRA MARINE
Unit 20, Worle Industrial Centre, Worle, Weston-Super-Mare, North Somerset,
England BS22 6BX
Tel: +44 (0) 1934 517288 Fax: +44 (0) 1934 520684 E-mail: info@mactrashop.co.uk
© Mactra Marine Equipment
World Cruising
Club website
(opens in new window)
Back to Top